KEENON comparison

KLEENBOT C30, C40 and C55 comparison to choose your cleaning robot

This guide helps you decide which KEENON autonomous cleaning robot fits best based on floor area, cleaning frequency, tank size and ROI target. The right choice avoids over-investing and lets you start with the model that pays back soonest.

Table 1 · Applications and first step
ModelRecommended useMain advantageRecommended first step
KLEENBOT C30Compact areas, restaurants, offices and small hotelsLower upfront investment; dry cleaning (3-in-1)Request a floor-area assessment
KLEENBOT C40Mid-size hotels, hospitals, care homes and common areasBest balance of coverage, scrubbing and operating costCalculate the C40 ROI
KLEENBOT C55Airports, shopping centres, logistics and large facilitiesHigh scrubbing capacity for intensive operationsAssess a zone-based pilot
Table 2 · Technical data published on the product pages
ParameterC30C40C55
Published performanceUp to 600 m²/hUp to 1,100 m²/hUp to 2,376 m²/h (maximum theoretical efficiency)
FunctionsSweeping, vacuuming and dry mopping (3-in-1)Sweeping, vacuuming, scrubbing and dust mopping (4-in-1)Sweeping, scrubbing and mopping (triple roller)
Clean water tankNot applicable (dry cleaning)16 L60 L
Waste water tankNot applicable (dry cleaning)11 L47 L
Recommended floor areaUp to 500 m²500–4,500 m²Over 3,000 m²
Battery lifeUp to 6 h (vacuuming/sweeping) · up to 10 h (mopping)5 h (scrubbing) · 12 h (sweeping)5 h (hot-swappable battery)
Cleaning width61 cm (with side brushes)Sweeping 56 cm · scrubbing 40 cmScrubbing 55 cm (without side brush)
Weight with battery35 kg70 kg150 kg

Values taken from each model's product page (linked in the header). Hourly performance is the figure published by the manufacturer and is not the same as the recommended floor area; the C55 figure is a maximum theoretical efficiency. The C30 cleans dry and has no water tanks.

All three models are available to buy outright, through financing or as a monthly-fee service (OpExFlow), with ownership, maintenance and continuity conditions depending on the contracted option. Deployment time is planned during the assessment according to the property and its integrations.

How to choose the right one

Start with real floor area

Measure usable square metres, not the building's total area. The robot is sized by routes and frequency, not by the property's commercial size.

Configure fleet and ROI

Weigh shifts and noise

If cleaning happens at night, noise level, battery life and return-to-dock matter as much as raw power.

See autonomous cleaning

Compare total cost

The base price is only one part. Include installation, mapping, training, support, accessories and consumables.

Read the pricing guide

FAQ

Which model is the most balanced for hotels?

In most mid-size hotels, the KLEENBOT C40 is the sweet spot for coverage, tank and operating cost.

When should I choose the C55?

When the floor area per shift clearly exceeds 2,000 m² or there is heavy traffic and a need for high capacity.

Is the C30 good enough for hotels?

Yes, in small hotels, specific zones or compact spaces where a larger robot isn't worth installing.

How much does each model cost?

As a guide, the KLEENBOT C30 starts at €8,900, the C40 at €12,500 and the C55 at €18,900 (+ VAT). They are also available through financial renting (with Grenke) or as an OpExFlow service (RaaS) with a monthly fee. The final price is on request depending on configuration and included services.

Request a free assessmentSee KLEENBOT C40